Skip to main content

Biangle Labs

← All services

Biangle Labs · Mechanical engineering

Solve the next mechanical problem.

A mechanism sticks. Parts don't fit as expected. A material behaves differently in use. We help turn a mechanical problem into a focused investigation, then use calculations, models and practical experiments as appropriate to decide what to change.

Close-up of the model-eye cornea lens with an inset showing the edge used for its fluid seal.
RetiVue Adult Model Eye · a lens-edge detail involved in developing the fluid seal.
Engineering grounded in physical work.

Biangle contributed mechanical engineering, materials and machining expertise, prototyping and iterative development alongside RetiVue's team. The case study follows material compatibility, seals, assembly and manufacturing choices that needed repeated development.

Read the model-eye case study

A useful starting point

Where is the project getting stuck?

01

A mechanism needs developing

Work through motion, loads and component interfaces. Define what the assembly needs to do before detailing a solution.

02

A prototype has exposed a problem

Investigate fit, material behavior or assembly difficulties. Build the next test around the uncertainty that matters most.

03

Existing equipment needs understanding

Document a custom part or machine through measurement and CAD reconstruction, then define possible improvements around the actual equipment.

What you leave with

A clear question. A useful next milestone.

We start with the conditions of use, the evidence you already have and what a useful result would look like. The scope can include:

  • An engineering review of mechanisms, materials, fits or interfaces.
  • Revised CAD, drawings or a record of design decisions.
  • A focused prototype, practical checks and documented findings.

Our workshop supports making, fitting and revising development parts. We choose the build and test work around the question, then use what we learn to guide the next revision.

Before we start

Can you work on an existing design?

Yes. Bring the available drawings, parts and test history. We can scope a review or reconstruction before proposing changes.

Do we need a whole new prototype?

Not always. A focused part, fixture or assembly test may answer the immediate question. We choose the approach after reviewing the problem.

What happens after the investigation?

We review the findings together and identify the next design or test step. Further development and build documentation can be scoped from that evidence.

What does the next test need to prove?

Describe the problem, the conditions that matter and what you have tried. We can work out a useful next step together.